Rivet stud with skirt

NBR, the new type of rivet stud from PROFIL is riveted into pre-punched formed sheet metal parts. The formed sheet metal part is form-fitted and friction-locked between the stud head and the rivet section around the threaded shaft in the process. This results in a connection that can withstand extremely high dynamic and static load conditions in pull or push direction. Only the support areas of the stud are being formed for the placement of the rivet so that the sheet metal part remains completely intact.

Application area

  • These rivet studs can be used for component thicknesses from 0.5 to 2.5 mm and tensile strengths of up to 1000 MPa
  • Suitable for a wide range of high dynamic, static and impact load conditions
  • Suitable for use where threaded fittings need to be resistant to high axial forces
  • Can be used for aluminium or other materials
  • Suitable for use with surface-treated, galvanised or painted components

Technical characteristics

  • Thread sizes: M6 to M8
  • FK 8 (standard)
  • Resistance to corrosion in accordance with the customerĀ“s requirements
  • Pre-punched processing
  • No adverse effects on the joint or function of the thread; no damage due to weld spatters
  • High resistance to twist and ejection forces
  • Stud positioning tolerance ranges can be halved as compared to welding methods
  • Water-tight and gas-tight in reference to the requirements demanded by the automotive sector and dependent on the quality of the component material
  • Straightforward, in-process and non-destructive quality testing possible by worker instead of elaborate destructive tests

Your contact

PROFIL
Telephone: 49 (0)6175 799-0

Processing steps

  • Prepare hole
  • Position component above die
  • The support fastener is pushed through the component material by means of axial motion
  • The specific geometry of the die is used to form the stud shaft around the hole of the component material so as to result in a form-fitting and friction-locking connection.

As-delivered condition

Sheet-metal preparation

Processed

Assembled/screwed

Typical applications

Automotive sector

Body parts, e.g. attachment of seat belts, attachment of seats, lock connections, front ends, doors, hatches and bonnets, seats, instrument panels, rear panels, hinge attachments, fastening of bumpers

Non-automotive sector

Thick- and thin-walled formed sheet metal parts, e.g. household appliances, agricultural machines, construction industry, building hardware industry, solar industry and shelf-making

Custom versions

Strength classes 10, 12; stainless steel or aluminium, UNC/UNF whitworth, designs possible as centring pin, step stud or shaft stud, various shaft lengths